Project Case Studies :: PA Systems
St. Mary's Church
St Mary's is a vibrant Anglican church in the heart of Luton, bringing people together on the journey of faith.
About the project
A concert specification loudspeaker system distributed into the many areas of this large parish church of St Mary's in Luton.
The Tannoy speaker cabinets were finished in white to blend with the room decoration. The amplifier and graphic equaliser units were installed in the equipment cabinet behind the choir stalls.
There are two interesting controls, a sequential power on/off unit from Bryant Broadcast and tonal controls from BSS - Soundweb lite (model 3088LL).
Summary of equipment installed
- Loudspeakers: V15, V12, V12HP, VS18DR, i7
- Amplifiers: RMX4050HD, RMX2450, RMX850
- Graphic equalisers: BSS 3088 soundweb lite, BSS FCS966 opal series
Technical Notes
- V15 - sensitivity @ 1w/1m 100dB: freq 50Hz - 23KHz: disp 75°
- V12HP - sensitivity @ 1w/1m 99dB: freq 67Hz - 23KHz: disp 75°
- V12 - sensitivity @ 1w/1m 97dB: freq 51Hz - 25KHz: disp 90°
- VS18DR - sensitivity @ 1w/1m 101dB: freq 27Hz - 240Hz
- RMX4050HD - 800w @ 8ohms
- RMX2450 - 500w @ 8ohms
- RMX850 - 360w @ 8ohms
- BSS 3088 - digital signal processors
- BSS FCS966 - manual dual graphic equaliser
If you have a similar project requirement and think that we could help you, please contact us.
Tannoy V15 tops and V18DR subs. With a Bose101 fill for the front row
A full equipment cabinet containing amps